stock taper of cj steering arm

texancj7 · 05-25-2008, 11:17 PM

Does any one happen to know what the stock taper of a cj steering arm knuckle is. I know what reamer it would be but i specifically need to know the degree of taper. I'm having some custom high steer arms made that utilize the stock cj tie rod ends and not the chevy one ton ends that all aftermarket high steer arms come with.Thanks

CJ Chet · 05-25-2008, 11:21 PM

Mine measures 8 degrees.

05-25-2008, 11:17 PM	#1
texancj7 Registered Join Date: Oct 2006 Location: Sydney, NSW Posts: 457 Thanks: 0 Thanked 3 Times in 3 Posts	stock taper of cj steering arm Does any one happen to know what the stock taper of a cj steering arm knuckle is. I know what reamer it would be but i specifically need to know the degree of taper. I'm having some custom high steer arms made that utilize the stock cj tie rod ends and not the chevy one ton ends that all aftermarket high steer arms come with.Thanks __________________ 85 cj7.1990 302 HO.stretched front 1" and rear 4".98" WB.YJ 1.5" RE SOA springs and chevy 52"s.anti-wrap bar.full cage tied to frame and seats.37x12.5x15 MTRs.hydro-assist.custom front bumper/stinger/fenders/sliders/rear stretch corners/rear bumper.rock lights.narrowed d44, 1 ton high steer.welded.4.88 gears.narrowed 609 rear axle, ford 9" fullfoating. d60 outers trussed and shaved, 4.88 gears, full spool, 35 spline moser shafts.10 lb co2.dana 300 x-case clocked.np-435.hydro clutch.corvette/yj power brakes. 85:1 crawl

05-25-2008, 11:21 PM	#2
CJ Chet Registered Join Date: Jan 2007 Location: Yorktown,Va. Posts: 624 Thanks: 0 Thanked 4 Times in 2 Posts	Mine measures 8 degrees. __________________ When you turn on your Jeep - Does it return the favor? '86 CJ7; 4" lift; 258; Weber; DUI; Borlas; TF999; etc. etc. etc. '04 TJ Sahara

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode