Transgo 46RE

bulldog59 · 08-31-2006, 07:59 AM

Does anyone have a part # for this? I can't seem to find it anywhere.

SMTCapeCod · 08-31-2006, 09:33 AM

Check here at http://www.apsprecision.com/

bulldog59 · 09-26-2006, 02:30 PM

Has anyone run into any issues installing the transgo? Any recomendations/advice ?

SMTCapeCod · 09-26-2006, 03:15 PM

Make sure everything is clean-clean-clean.
Get a top-quality ATF to take full advantage of the shift kit, I like Redline C+, but thats the spec for my WJ.
Its not very difficult, really.

WiCKeD · 09-26-2006, 03:35 PM

TFOD-HD2
Get it here cheapest: http://www.transmissionpartsusa.com/...=500-054978HD2
Here is a step-by-step guide: http://www.hometown.aol.com/gnkim/transgo1.html
Take your time.

bulldog59 · 10-01-2006, 12:26 PM

Can anyone tell me what mph their trans shifts @ now with the kit installed( 1st to 2nd shift) maybe about 1/8 throttle. Mine seems to upshift at low throttle around 10mph. 1/2 throttle about 15-20. Just seems a little low to me.

08-31-2006, 07:59 AM	#1
bulldog59 Registered Join Date: Jul 2006 Location: CT Posts: 129 Thanks: 0 Thanked 0 Times in 0 Posts	Transgo 46RE Does anyone have a part # for this? I can't seem to find it anywhere.

09-26-2006, 03:35 PM	#5
WiCKeD Registered Join Date: May 2005 Location: Neutral Switzerland Posts: 1,941 Thanks: 2 Thanked 0 Times in 0 Posts	J O I N [ T H E S P E A D F R E A K S . N E T ] TFOD-HD2 Get it here cheapest: http://www.transmissionpartsusa.com/...=500-054978HD2 Here is a step-by-step guide: http://www.hometown.aol.com/gnkim/transgo1.html Take your time. __________________ Supercharged '98 Jeep Grand Cherokee 5.9er SCT Tuned / Vortech V-2 SQ Supercharger / F&B 52mm TB / P&P Kegger / Southeast Performαnce Blower Built 360 & CNC Ported 2.02 R/T Heads / COMP Cams Custom Cam / Crower Rockers / Doug Thorley Headers / MSaine Valve Body / 247\|249 Hybrid Transfer Case / Kolak Exhaust / Mopar Rubber Cupholder =>Join TheSpeedFreaks.net <=

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-31-2006, 09:33 AM	#2
SMTCapeCod Registered Join Date: Feb 2006 Posts: 337 Thanks: 0 Thanked 0 Times in 0 Posts	Check here at http://www.apsprecision.com/

09-26-2006, 02:30 PM	#3
bulldog59 Registered Join Date: Jul 2006 Location: CT Posts: 129 Thanks: 0 Thanked 0 Times in 0 Posts	Has anyone run into any issues installing the transgo? Any recomendations/advice ?

09-26-2006, 03:15 PM	#4
SMTCapeCod Registered Join Date: Feb 2006 Posts: 337 Thanks: 0 Thanked 0 Times in 0 Posts	Make sure everything is clean-clean-clean. Get a top-quality ATF to take full advantage of the shift kit, I like Redline C+, but thats the spec for my WJ. Its not very difficult, really.

10-01-2006, 12:26 PM	#6
bulldog59 Registered Join Date: Jul 2006 Location: CT Posts: 129 Thanks: 0 Thanked 0 Times in 0 Posts	Can anyone tell me what mph their trans shifts @ now with the kit installed( 1st to 2nd shift) maybe about 1/8 throttle. Mine seems to upshift at low throttle around 10mph. 1/2 throttle about 15-20. Just seems a little low to me.