Fuel Injectors

HardcoreLikeWhoa · 01-21-2003, 02:26 AM

Ok.......fuel injectors. 89 XJ. any comments? what would you guys suggest....prices if possible.

im just getting an idea here.

thanks in advance.

hpi_jeep · 01-21-2003, 02:42 AM

dont quote me on this, but a few guys from here use 9# injectors from mustang 5.0 motors...
you could do a search i remember a guy on here has a website that actually has detailed information on this, i dont remember the URL or his username.

red87cherokee · 01-21-2003, 04:04 AM

Quote:

-=- originally posted by hpi_jeep -=-
dont quote me on this, but a few guys from here use 9# injectors from mustang 5.0 motors...

19#

HardcoreLikeWhoa · 01-21-2003, 04:07 AM

rock on, thanks.

KINGSIZEXJ · 01-21-2003, 04:32 AM

WWW.FIVEOMOTORSPORT.COM

Ask for Bruce. 19# ford injectors with a great spray pattren for better atomization in the cylinder. Stock injectors spray in a straight line. These spray in a circle pattren. I picked my set up a few months back and love them. I think they are $157 for a set of 6. Great deal great guy to deal with.

KINGSIZE

LAWLESS · 01-21-2003, 10:00 AM

Quote:

-=- originally posted by KINGSIZEXJ -=-
WWW.FIVEOMOTORSPORT.COM

Ask for Bruce. 19# ford injectors with a great spray pattren for better atomization in the cylinder. Stock injectors spray in a straight line. These spray in a circle pattren. I picked my set up a few months back and love them. I think they are $157 for a set of 6. Great deal great guy to deal with.

KINGSIZE

I bought from this outfit too.......well worth the money

BUCKYXJ · 01-21-2003, 10:36 AM

I got mine from www.karkraft.com for $89.00 for 8 of them. They work great...
DIG IT

KINGSIZEXJ · 01-21-2003, 09:49 PM

Just remember if your running a NON HO 4.0L you need 19Lbs injectors. But if you have a HO 4.0L motor you'll need to use the 24Lbs injectors. This also goes for the guys with stroker motors. Hope that helps.

KINGSIZE

KINGSIZEXJ · 01-21-2003, 09:58 PM

BUCKYXJ: KARKRAFT INJECTORS

Only problem with KarKraft.Com is there Injectors are used. When it comes to injectors im not going to take that chance . FIVEOMOTORSPORTS.COMs injectors are all new & they also have a better spray pattren. If you wanna go really chaep try EBAY ive seem 19Lbs injectors going for $15 for a set of 8. But then again they are used goods. I kinda have the theory of ya get what you pay for. But thats just my $0.02

KINGSIZE :rocks:

LAJeepHeat · 01-21-2003, 10:52 PM

I bought six of the 19's, came out to something like $23-$24 per injector. Unbelieveable deal. Great guy. There you have it.

Gizmo · 01-22-2003, 09:42 AM

Quote:

-=- originally posted by KINGSIZEXJ -=-
Only problem with KarKraft.Com is there Injectors are used. When it comes to injectors im not going to take that chance . FIVEOMOTORSPORTS.COMs injectors are all new & they also have a better spray pattren.

I think KarKraft lists their injectors as new takeoffs. No, they are not new, but they have little or no mileage on them, so they should be as good as new. However, when I purchased mine, I was under the impression that all the Ford injectors would have the four hole spray pattern, but these don't. My old injectors had over 300,000Km on them, so for $89, I can't really complain (I even have two spares). By the way, KarKraft had nothing to do with my assuming that I would be getting the four hole pattern. I did that all by myself :naw:

Dave

GrimGrim · 01-22-2003, 10:08 AM

Quote:

-=- originally posted by BUCKYXJ -=-
I got mine from www.karkraft.com for $89.00 for 8 of them. They work great...
DIG IT

Will they fit whithout any changes to connectors or other parts?

They are "New engine take outs." so I guess the work fine and are as good as new since they've only ran about 5 mls.

phasor21 · 01-22-2003, 01:25 PM

I have a bad injector in the wifes 96. I'm thinking I could get myself some stang injectors for my 95 and have my old ones for parts

Are they plug and play? or do I need a connector.
also, for my 95, #19 won't work, need 24lb.?
and finally, is it worth it? or will i just kill mpg a little more.

KINGSIZEXJ · 01-24-2003, 12:44 AM

Yes they are plug and play injectors. Yes you will need the 24Lbs injectors for your 95 stock rating is 23.6Lbs so 24Lbs will be fine. And fianly your only going up 00.4Lbs so i highly doubt that it will effect your MPG. Also they are new so you may get even better MPG. Hope that helped.

KINGSIZE

poor mans MACHINE · 01-24-2003, 12:57 AM

Ford SVO 19# should work since I've run them in both a stock 4.0 and heavily modified 4.6 stroker without trouble for 5 years now.

5Cent · 01-24-2003, 01:06 AM

Don't mean to thread invade, but i'm looking to do this too sometime in hopes of deturing o-ring leakage. My 92 has 140k on it and the ease of mine would do wonders. It's HO, so 24lbs, and ford 5.0 will work, just disconnect, new o-rings and connectors? Is there a write-up on this? Also, does the haynes have anything on it?

01-21-2003, 02:42 AM	#2
hpi_jeep Registered Join Date: Feb 2001 Location: Mo, Eldon Posts: 2,301 Thanks: 0 Thanked 0 Times in 0 Posts	dont quote me on this, but a few guys from here use 9# injectors from mustang 5.0 motors... you could do a search i remember a guy on here has a website that actually has detailed information on this, i dont remember the URL or his username. __________________ jeep xj3500 In memory of Nicholas Evers. \|?\|\|\|\|\|\|\|?\|

01-21-2003, 04:07 AM	#4
HardcoreLikeWhoa Registered Join Date: Nov 2002 Location: Braidwood, IL Posts: 63 Thanks: 0 Thanked 0 Times in 0 Posts	rock on, thanks. __________________ never have a jeep following a broken jeep. always have at least one vehicle of another nature doing the following. we learn the hard way.

01-21-2003, 04:32 AM	#5
KINGSIZEXJ Registered Join Date: Dec 2002 Location: Simi Valley, CA. Posts: 288 Thanks: 0 Thanked 0 Times in 0 Posts	WWW.FIVEOMOTORSPORT.COM Ask for Bruce. 19# ford injectors with a great spray pattren for better atomization in the cylinder. Stock injectors spray in a straight line. These spray in a circle pattren. I picked my set up a few months back and love them. I think they are $157 for a set of 6. Great deal great guy to deal with. KINGSIZE __________________ www.genright.com 98 TJ Currie Rock Jock 60s, GR Crawler COMP Tank, Atlas 4 Spd, Lowrance HDS5m GPS, Beard Enduro GT Seats, Walker Evans Beadlock Wheels, 2.5" Short Arm, 40" Goodyear Kevlar, ORO LiteDOTs, ORO LiteSPOTZ, GenRight 4" Hi-Fender Kit, GR Full Cage, GR Boulder Series Front Hoop & Rear Tire Carrier etc.. 08 JK Rubicon, 2.5" Lift, GenRight Winch Bumper & Rear Tire Carrier, GR DIY Rocker Guards, Walker Evans Beadlock Wheels, 35" Goodyear Kevlar MT/R, Bestop Supertop,

01-21-2003, 10:36 AM	#7
BUCKYXJ Registered Join Date: Oct 2002 Location: Tulsa, Ok Posts: 689 Thanks: 0 Thanked 0 Times in 0 Posts	injectors I got mine from www.karkraft.com for $89.00 for 8 of them. They work great... DIG IT

01-21-2003, 09:49 PM	#8
KINGSIZEXJ Registered Join Date: Dec 2002 Location: Simi Valley, CA. Posts: 288 Thanks: 0 Thanked 0 Times in 0 Posts	Just remember if your running a NON HO 4.0L you need 19Lbs injectors. But if you have a HO 4.0L motor you'll need to use the 24Lbs injectors. This also goes for the guys with stroker motors. Hope that helps. KINGSIZE __________________ www.genright.com 98 TJ Currie Rock Jock 60s, GR Crawler COMP Tank, Atlas 4 Spd, Lowrance HDS5m GPS, Beard Enduro GT Seats, Walker Evans Beadlock Wheels, 2.5" Short Arm, 40" Goodyear Kevlar, ORO LiteDOTs, ORO LiteSPOTZ, GenRight 4" Hi-Fender Kit, GR Full Cage, GR Boulder Series Front Hoop & Rear Tire Carrier etc.. 08 JK Rubicon, 2.5" Lift, GenRight Winch Bumper & Rear Tire Carrier, GR DIY Rocker Guards, Walker Evans Beadlock Wheels, 35" Goodyear Kevlar MT/R, Bestop Supertop,

01-21-2003, 02:26 AM	#1
HardcoreLikeWhoa Registered Join Date: Nov 2002 Location: Braidwood, IL Posts: 63 Thanks: 0 Thanked 0 Times in 0 Posts	Fuel Injectors Ok.......fuel injectors. 89 XJ. any comments? what would you guys suggest....prices if possible. im just getting an idea here. thanks in advance. __________________ never have a jeep following a broken jeep. always have at least one vehicle of another nature doing the following. we learn the hard way.

01-21-2003, 09:58 PM	#9
KINGSIZEXJ Registered Join Date: Dec 2002 Location: Simi Valley, CA. Posts: 288 Thanks: 0 Thanked 0 Times in 0 Posts	BUCKYXJ: KARKRAFT INJECTORS Only problem with KarKraft.Com is there Injectors are used. When it comes to injectors im not going to take that chance . FIVEOMOTORSPORTS.COMs injectors are all new & they also have a better spray pattren. If you wanna go really chaep try EBAY ive seem 19Lbs injectors going for $15 for a set of 8. But then again they are used goods. I kinda have the theory of ya get what you pay for. But thats just my $0.02 KINGSIZE :rocks: __________________ www.genright.com 98 TJ Currie Rock Jock 60s, GR Crawler COMP Tank, Atlas 4 Spd, Lowrance HDS5m GPS, Beard Enduro GT Seats, Walker Evans Beadlock Wheels, 2.5" Short Arm, 40" Goodyear Kevlar, ORO LiteDOTs, ORO LiteSPOTZ, GenRight 4" Hi-Fender Kit, GR Full Cage, GR Boulder Series Front Hoop & Rear Tire Carrier etc.. 08 JK Rubicon, 2.5" Lift, GenRight Winch Bumper & Rear Tire Carrier, GR DIY Rocker Guards, Walker Evans Beadlock Wheels, 35" Goodyear Kevlar MT/R, Bestop Supertop,

01-21-2003, 10:52 PM	#10
LAJeepHeat Registered Join Date: Sep 2001 Location: Los Angeles, CA Posts: 81 Thanks: 0 Thanked 0 Times in 0 Posts	buy em from fiveoh I bought six of the 19's, came out to something like $23-$24 per injector. Unbelieveable deal. Great guy. There you have it.

01-22-2003, 01:25 PM	#13
phasor21 Registered Join Date: Mar 2002 Location: Motor City Posts: 122 Thanks: 0 Thanked 0 Times in 0 Posts	I have a bad injector in the wifes 96. I'm thinking I could get myself some stang injectors for my 95 and have my old ones for parts Are they plug and play? or do I need a connector. also, for my 95, #19 won't work, need 24lb.? and finally, is it worth it? or will i just kill mpg a little more. __________________ // 95 XJ // RE 4.5 // 32 SSRs //

01-24-2003, 12:44 AM	#14
KINGSIZEXJ Registered Join Date: Dec 2002 Location: Simi Valley, CA. Posts: 288 Thanks: 0 Thanked 0 Times in 0 Posts	Yes they are plug and play injectors. Yes you will need the 24Lbs injectors for your 95 stock rating is 23.6Lbs so 24Lbs will be fine. And fianly your only going up 00.4Lbs so i highly doubt that it will effect your MPG. Also they are new so you may get even better MPG. Hope that helped. KINGSIZE __________________ www.genright.com 98 TJ Currie Rock Jock 60s, GR Crawler COMP Tank, Atlas 4 Spd, Lowrance HDS5m GPS, Beard Enduro GT Seats, Walker Evans Beadlock Wheels, 2.5" Short Arm, 40" Goodyear Kevlar, ORO LiteDOTs, ORO LiteSPOTZ, GenRight 4" Hi-Fender Kit, GR Full Cage, GR Boulder Series Front Hoop & Rear Tire Carrier etc.. 08 JK Rubicon, 2.5" Lift, GenRight Winch Bumper & Rear Tire Carrier, GR DIY Rocker Guards, Walker Evans Beadlock Wheels, 35" Goodyear Kevlar MT/R, Bestop Supertop,

01-24-2003, 12:57 AM	#15
poor mans MACHINE Registered Join Date: Apr 2002 Location: Carol Stream Ill Posts: 2,029 Thanks: 0 Thanked 0 Times in 0 Posts	Ford SVO 19# should work since I've run them in both a stock 4.0 and heavily modified 4.6 stroker without trouble for 5 years now. __________________ moderator of NAMDRA Forum Food for thought. You never have either the time or money to fix it right, but you always find the time and money to fix it over and over. Users assume all risks of advice givenby me. Remember,the fire extinguisher is your friend. NAMDRA Officer / member # 2923

01-24-2003, 01:06 AM	#16
5Cent Registered Join Date: Mar 2002 Location: Castalia, Ohio Posts: 590 Thanks: 0 Thanked 0 Times in 0 Posts	Don't mean to thread invade, but i'm looking to do this too sometime in hopes of deturing o-ring leakage. My 92 has 140k on it and the ease of mine would do wonders. It's HO, so 24lbs, and ford 5.0 will work, just disconnect, new o-rings and connectors? Is there a write-up on this? Also, does the haynes have anything on it? __________________ 92XJ Laredo, 4" OME/RE Hybrid Lift,RE HD Trackbar/bracket, 32" Dunlop Rover MT's,CSF 3 Row, IPF Lenses w/ Fatboy Bulbs,CB,Mopar Tire Carrier "The original point and click interface was a Smith and Wesson" http://community.webshots.com/user/anickle741

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode