Results 1 to 6 of 6

Thread: Herculiner removal???

  1. #1
    Registered
    Join Date
    Feb 2011
    Location
    Warren, Pa.
    Posts
    8

    Default Herculiner removal???

    Long story short (sorta) years ago I hurced my jeep and hurced over the torks bolts on the stock roll cage and need to take the cage off to put a poison spyder full cage (used and already welded) in but need to get the hurc off to get the bolts out....... any suggestions???

    thanks

  2. #2
    Ham for you? warmhambone's Avatar
    Join Date
    Feb 2010
    Location
    Albany but thinkin about Blue Ridge
    Posts
    1,072

    Default

    You could try MEK, or xylene. There is one more that I have used to remove 2 part epoxy that I cant remember right now. You could also try a heat gun. Hope this helps.
    2000 XJ Sport 4x4. Silver with white fender. Titan 4.6L Stroker, 31" MT'S, 3" RC lift, JCR bumper

    1997 TJ Sport. 4.0, 5 Speed, 4" Pro Comp lift, 17" Pro Comp Wheels, 35" Claws.

  3. #3
    Administrator LoTGoD's Avatar
    Join Date
    Sep 2004
    Location
    Danger Zone
    Posts
    2,239

    Default

    Just use a razor knife around the bolts you need to remove. Clean and easy, as long as you don't slice your finger off.

    Use a small screwdriver or pick to get the herc out of the torx slots.
    Πόντιος Πιλᾶτος

    Hal • le • lu • jah

  4. #4

    Default

    So... don't slice fingers off?

  5. #5
    Registered
    Join Date
    Feb 2011
    Location
    Warren, Pa.
    Posts
    8

    Default

    Quote Originally Posted by delford321 View Post
    So... don't slice fingers off?
    the blood must not get the hurc off very well!!!

    BTW found something online Clicky!!!

    Thanks for the replys

    now all I need to do is go to the hardware store to see if they have the stuff!!!
    Last edited by we3jeepers; 03-24-2011 at 08:48 AM.

  6. #6
    Administrator LoTGoD's Avatar
    Join Date
    Sep 2004
    Location
    Danger Zone
    Posts
    2,239

    Default

    Quote Originally Posted by delford321 View Post
    So... don't slice fingers off?
    You can feel free to slice yours off, but don't come crying to me when you need some change out of your pocket for a cup of coffee.
    Πόντιος Πιλᾶτος

    Hal • le • lu • jah

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Jeep Parts | Jeep Accessories | Trektop NX | Jeep Seat Covers | Jeep Wrangler | Jeep Wrangler Parts | Jeep Wrangler Accessories | Bestop | Jeep Tires | Jeep Stuff | Jeep Wrangler Tires | Jeep Wheels