Results 1 to 4 of 4

Thread: Are these axles a perfect swap?

  1. #1
    Registered
    Join Date
    Oct 2004
    Location
    Alpena,MI
    Posts
    213

    Default Are these axles a perfect swap?

    Im swapping a dana 30 from a 97 ZJ into my 95 ZJ.The numbers on the gears are posted below.I would like to know if they have the same gears or not. Trav

    10 2994 Dana d 37768 p81 41 11 17

    91296 Dana d 43982 p8l725 3911 370

  2. #2

    Default

    Quote Originally Posted by gettingazj View Post
    Im swapping a dana 30 from a 97 ZJ into my 95 ZJ.The numbers on the gears are posted below.I would like to know if they have the same gears or not. Trav

    10 2994 Dana d 37768 p81 41 11 17

    91296 Dana d 43982 p8l725 3911 370
    Don't think so. I'm pretty sure the 41 11 and 39 11 mean the number of teeth on the ring and pinoin, that is: 41/11 =3.73 and 39/11=3.55.

  3. #3
    Registered onegoodmason's Avatar
    Join Date
    Feb 2008
    Location
    Edmonton , Canada
    Posts
    1,003

    Default

    Quote Originally Posted by twojeeps View Post
    Don't think so. I'm pretty sure the 41 11 and 39 11 mean the number of teeth on the ring and pinoin, that is: 41/11 =3.73 and 39/11=3.55.
    Absolutely correct , do not install . Damages a plenty will occur
    1995 Orvis Edition .
    7.5" IRO LA's
    Mopar perf PCM & MSD ign
    Clayton's springs
    Bilstien shocks
    Claytons TB and bracket
    WJ steering and brakes
    5.9 Parts
    -Rockers
    -Grille
    -Roof rack
    -Leather shifters and bezel
    -Hood Vents
    -ETC.-ETC.-ETC.


    1998 5.9 -100 K
    Edlebrock headers , 2.5cat and MF muffler
    -MSD Ignition
    -Mopar perf PCM
    -IRO replacement lower CA's
    -K&N FIPK
    -New tires , perf. brakes , all oils and new rad
    ......etc etc .......so far

    1988 MJ 2.5 5 spd 2wd
    -5.5 Hybrid lift on BFG 32's
    -1998 XJ front clip and doors
    -engine/trans/4x4/dash/ABS/AC coming very soon

    2007 Ram 3500 5.9l cummins
    Chipped and plumbed 495hp

  4. #4
    Registered
    Join Date
    Oct 2004
    Location
    Alpena,MI
    Posts
    213

    Default

    Well i guess i will have to swap out the gears then,but i was told on mallcrawlin there was a change from long to short pinion and the gears wont swap. Can anyone confirm this?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Jeep Parts | Jeep Accessories | Trektop NX | Jeep Seat Covers | Jeep Wrangler | Jeep Wrangler Parts | Jeep Wrangler Accessories | Bestop | Jeep Tires | Jeep Stuff | Jeep Wrangler Tires | Jeep Wheels