Results 1 to 8 of 8

Thread: Power Steering Pump/Assembly Diagram

  1. #1
    Registered
    Join Date
    Dec 2004
    Location
    Richmond, Va
    Posts
    256

    Default Power Steering Pump/Assembly Diagram

    I'm about to pull out my existing manual steering and install a recently purchased power steering setup for my '84 CJ-7 w/ AMC 304. Haynes Repair talks briefly about it, but doesn't show any pictures of where the brackets and fittings go.

    Does anyone have a good source for detailed instructions?

    Thanks!
    '84 CJ7, 304, TF 999, 750 Edelbrock, Edelbrock HiPer Intake, nice QUIET Flowmaster 50 DF Series (now I can sneak up on people!), 4.5 RE, RS 9000X's, 35 BFG's

  2. #2
    Registered
    Join Date
    Dec 2004
    Location
    Richmond, Va
    Posts
    256

    Default

    OK, let me be more specific:

    Does anyone have a picture or diagram showing how the power steering fluid box, pulley system and hyd. fluid hookups connect to my 304?

    I've figured out the p/s box, but will need to know which hyd. tube goes to each connector at the box.

    Thanks in advance for your assistance!
    '84 CJ7, 304, TF 999, 750 Edelbrock, Edelbrock HiPer Intake, nice QUIET Flowmaster 50 DF Series (now I can sneak up on people!), 4.5 RE, RS 9000X's, 35 BFG's

  3. #3
    Registered fuzz401's Avatar
    Join Date
    May 2003
    Location
    lancaster pa
    Posts
    2,214

    Default




    from a 78 but should be close

    1978 cj-7 golden eagle had since 1979
    304 -360-401
    401 .030 over- full floating flat top pistons
    crower solid cam 292/298 - .500/.510 lift
    .246/.250 duration.050
    th-400 / 4500 stall
    Dana 44 5:13 gears
    aj glass body
    http://smg.photobucket.com/albums/v1...401/?start=all
    http://smg.photobucket.com/albums/v3...cj7/?start=all
    11.669 @ 112.33 mph 33x10.50 slicks and 4" lift in the 1/4 mile all motor no spray / 7.358 @ 93.03 mph in the 1/8 mile

  4. #4
    Registered
    Join Date
    Dec 2004
    Location
    Richmond, Va
    Posts
    256

    Default

    Fuzz,
    Thanks for the pictures - that helps a lot!

    BTW, 2 questions:

    1. What's the gauge just beneath the steering fluid reservoir?
    2. What the stainless canister connected to the engine side of the radiator?

    Nice engine btw - VERY clean!
    '84 CJ7, 304, TF 999, 750 Edelbrock, Edelbrock HiPer Intake, nice QUIET Flowmaster 50 DF Series (now I can sneak up on people!), 4.5 RE, RS 9000X's, 35 BFG's

  5. #5
    Registered tvpierce's Avatar
    Join Date
    Sep 2003
    Location
    Maine
    Posts
    227

    Default

    Fuzz,

    I think there's something wrong with your frame and engine... where's all the brown stuff?

    Jeff Pierce
    "If the women don't find you handsome, they should at least find you handy!" -- Red Green
    '85 CJ-7, 258/T-176, Howell TBI, Chevy HEI ignition, Fisher plow w/ belt-driven hydraulics, glass body, 2" lift, 31" tires

  6. #6
    Registered fuzz401's Avatar
    Join Date
    May 2003
    Location
    lancaster pa
    Posts
    2,214

    Default

    1. What's the gauge just beneath the steering fluid reservoir?

    fuel pressure gage

    2. What the stainless canister connected to the engine side of the radiator?

    overflow for the raddy

    1978 cj-7 golden eagle had since 1979
    304 -360-401
    401 .030 over- full floating flat top pistons
    crower solid cam 292/298 - .500/.510 lift
    .246/.250 duration.050
    th-400 / 4500 stall
    Dana 44 5:13 gears
    aj glass body
    http://smg.photobucket.com/albums/v1...401/?start=all
    http://smg.photobucket.com/albums/v3...cj7/?start=all
    11.669 @ 112.33 mph 33x10.50 slicks and 4" lift in the 1/4 mile all motor no spray / 7.358 @ 93.03 mph in the 1/8 mile

  7. #7
    Registered
    Join Date
    Dec 2004
    Location
    Richmond, Va
    Posts
    256

    Default

    Fuzz,
    Here's my engine bay - any ideas on cool / custom stuff??
    Attached Images Attached Images
    '84 CJ7, 304, TF 999, 750 Edelbrock, Edelbrock HiPer Intake, nice QUIET Flowmaster 50 DF Series (now I can sneak up on people!), 4.5 RE, RS 9000X's, 35 BFG's

  8. #8
    Registered fuzz401's Avatar
    Join Date
    May 2003
    Location
    lancaster pa
    Posts
    2,214

    Default

    looks good

    1978 cj-7 golden eagle had since 1979
    304 -360-401
    401 .030 over- full floating flat top pistons
    crower solid cam 292/298 - .500/.510 lift
    .246/.250 duration.050
    th-400 / 4500 stall
    Dana 44 5:13 gears
    aj glass body
    http://smg.photobucket.com/albums/v1...401/?start=all
    http://smg.photobucket.com/albums/v3...cj7/?start=all
    11.669 @ 112.33 mph 33x10.50 slicks and 4" lift in the 1/4 mile all motor no spray / 7.358 @ 93.03 mph in the 1/8 mile

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Jeep Parts | Jeep Accessories | Trektop NX | Jeep Seat Covers | Jeep Wrangler | Jeep Wrangler Parts | Jeep Wrangler Accessories | Bestop | Jeep Tires | Jeep Stuff | Jeep Wrangler Tires | Jeep Wheels