Results 1 to 3 of 3

Thread: How do you hook up a line output converter?

  1. #1
    Registered
    Join Date
    Nov 2001
    Location
    Raleigh, NC, USA
    Posts
    97

    Default How do you hook up a line output converter?

    I just don't get how this thing hooks up. There's a left and right high level input and then a Left and Right RCA low level output. It's supossed to hook up between the speaker leads. What I don't get is how do you hook this up to the sub amp but still have the door speakers hooked up? Could somebody please explain this to me? Thanks
    1998 Platinum ZJ Limited 5.2L
    Poweraid Throttle Body Spacer, Clear Corners, Tinted Windows, 2x12" Alpine Type R's, JBL 600.1, Knu Konceptz

  2. #2
    ericdag's play thing
    Join Date
    Nov 2000
    Location
    MN
    Posts
    417

    Default

    Tap the high/low into the existing speaker wiring, and then run RCAs from the outputs to the amplifier... pretty simple.

  3. #3
    Registered
    Join Date
    Nov 2001
    Location
    Surrey, BC.
    Posts
    779

    Default

    Just get 4 wire taps and then connect the left line input to the left speaker using the wire taps and the same on the right side, the wire are color coded for polarity (+) and (-), that's all there is to it. You don't need to disconnect your speakers either. Once that is done you are ready to connect the RCA's to the other end and to your amp.
    99 TJ 4.0L, 5spd.
    Super Blue

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Jeep Parts | Jeep Accessories | Trektop NX | Jeep Seat Covers | Jeep Wrangler | Jeep Wrangler Parts | Jeep Wrangler Accessories | Bestop | Jeep Tires | Jeep Stuff | Jeep Wrangler Tires | Jeep Wheels