Results 1 to 2 of 2

Thread: TPS Install

  1. #1
    Registered
    Join Date
    Jan 2002
    Location
    Waite Hill OH USA
    Posts
    268

    Question TPS Install

    I put a new TPS in my 98 5.2 over the weekend and the directions said to use eather the Oring or the gasket i used the gasket because i could not find a place to put an oring. Was putting the Gasket in the right move? I am making sure any one who has done this there imput would be greatly aprishiated what they used. Thanks Matt

    ------------------
    98 Grand Cherokee Limited 5.2
    Mods
    Mopar PCM
    180 T Stat
    Tranny Cooler
    KN Gen II
    Accel High Out put coil
    Kolak distributer and roator
    Taylor Plug wires
    Bosch Platium+2
    KN Cat Back
    Front Brush Guard Tail light cuvers and nurf bars
    98 Grand Cherokee Limited 5.2
    Mods
    Mopar PCM
    180 T Stat
    Tranny Cooler
    KN Gen II
    Accel High Out put coil
    Kolak distributer and roator
    Taylor Plug wires
    Autolight Spark Plugs
    KN Cat Back Exoust
    ML Headers
    Car Sound Cat
    APS 50mm TB
    Anthonys 2" BB
    UC Springs
    Front Brush Guard Tail light cuvers

  2. #2
    Registered
    Join Date
    Jan 2002
    Location
    Hayward, CA (SF-Bay Area)
    Posts
    208
    I purchased a new Throttle Position Sensor Kit today for my 98 5.9 ZJ. The kit paperwork referenced a 1999 WJ with a 4.7 engine. The Part Number of the kit was 05017479AA and the kit didn't include the O-ring Seal, only the gasket. AllDataDIY.com stated that I required an OEM Part No.: 4882219. Upon questioning the parts man we started out with the 4882219 and after numerous revisions the 05017479AA part that I received was the one called out for my 1998 JGC 5.9 Ltd. The instructions that came with the kit explained that if your throttle body didn't have an O-ring groove that you should use the gasket only. Good luck!

    ------------------
    Jim Larsen
    98 Deep Slate Grand Cherokee 5.9 Ltd.
    00 WJ 4.7 Ltd: My Son's
    96 ZJ 5.2 Ltd: My SO's
    93 ZJ 4.0 Laredo: Also Mine
    87 XJ 4.0: Gave it to my daughter.
    Jim Larsen
    98 ZJ 5.9 Ltd.(Deep Slate)
    00 WJ 4.7 Ltd: My Son's
    96 ZJ 5.2 Ltd: My SO's
    93 ZJ 4.0 Laredo: My back-up
    87 XJ 4.0: Driven by my Grandson

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Jeep Parts | Jeep Accessories | Trektop NX | Jeep Seat Covers | Jeep Wrangler | Jeep Wrangler Parts | Jeep Wrangler Accessories | Bestop | Jeep Tires | Jeep Stuff | Jeep Wrangler Tires | Jeep Wheels