Results 1 to 3 of 3

Thread: YJ D30 upgrade to XJ D30?

  1. #1
    Registered wcjp's Avatar
    Join Date
    Mar 2000
    Location
    Tacoma, Wa
    Posts
    1,815

    Post YJ D30 upgrade to XJ D30?

    Will the D30 axle shafts from a XJ fit my YJ? Do I need a disconnect axle to fit or can I move upto a one piece axle shaft and discard the vacuum disconnect? I'd rather not mess with manual hubs because of cost. If not a XJ how about a TJ with the 297x Ujoints? I'm running air lockers if it helps.

    ------------------
    93' XJ Country
    93' YJ 4.0, RE 4.5" XD, JKS Trac Bar, 31" Procomp MT's, Dual Arb's, Currie SYE, Turbo City Intake, 2.5 " Flowmaster catback, Hella H3's, Optima Yellow Top, Fleet Air Targa Top, Warn HS 9500i, Cross Front Bumper, Skid-Row Engine Skid, Canyon City Tire Carrier, Home Made Rockers



    Where we're going, we don't need roads.
    93' YJ Alcan Spring SOA, Detroit 8.8, Premier Power Welder, Poison Spyder Full Cage me

    06' Dodge Megacab CTD 6spd 4x4

    Where we're going, we don't need roads.



    MasterCraft Rubicon Race Seats-Great Seats
    Bad Customer Service

  2. #2
    Registered
    Join Date
    Nov 2000
    Location
    Los Angeles
    Posts
    3,453

    Post

    <font face="Verdana, Arial" size="2">Originally posted by wcjp:
    Will the D30 axle shafts from a XJ fit my YJ? Do I need a disconnect axle to fit or can I move upto a one piece axle shaft and discard the vacuum disconnect? I'd rather not mess with manual hubs because of cost. If not a XJ how about a TJ with the 297x Ujoints? I'm running air lockers if it helps.

    </font>
    all the innerds swap in. no disconnect shafts, better u joints, all that.


    ------------------
    -Tas
    '89 YJ, 4.2L, AX-15, Super Seat, TJ flares, 1" PA body lift, home made rocker gaurds, 1" BL, Ford TFI ignition with MSD blaster 3 coil and 8.5mm MSD wires, no suspension lift, 31" BFG AT KOs, LSD, Flowmaster 40series, Euro tail-lights....

    Super GRK_Taz World
    Jeep pics!
    AOL IM: superGRtaz

    Wanted: complete YJ 4cyl 4.10/4.11 axles in SoCal.
    '89 YJ, 4.2L, ax-15, B&M shifter, 1" BL, TJ flares, '99 intake, '91 EFI, 5.0L explorer injectors, GenRight tank & stretch, 35" ProComp Xtreme muds, 52" chevy springs rear, 44044 Ranchos front.....

  3. #3
    Registered
    Join Date
    Apr 2001
    Location
    PDX, OR
    Posts
    1,539
    Everything crosses over. The cool part is, if you get a 87 or 88 XJ front 30 its hi pinion! I'm not sure about later years though...

    ------------------
    -Justin Myers-
    Do us all a favor and think first.
    -Justin Myers-
    Expedition Ready

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Jeep Parts | Jeep Accessories | Trektop NX | Jeep Seat Covers | Jeep Wrangler | Jeep Wrangler Parts | Jeep Wrangler Accessories | Bestop | Jeep Tires | Jeep Stuff | Jeep Wrangler Tires | Jeep Wheels