• Tech Articles RSS Feed

    by Published on 08-19-2016 01:51 PM
    Article Preview

    ESAB sent me a Rebel emp 215ic and challenged me to a series of dares. This is the first of several dares which will become a complete review of the Esab Rebel EMP 215ic multi-process welder



    The first dare was to document the unboxing and what all comes in the box. The Rebel EMP 215ic comes with everything you need to start MIG, TIG and Stick welding except for the shielding gas! They include MIG wire and welding rods so you can start welding right out of the box. The Rebel EMP 215ic "offer 120/230V flexibility and some of the most innovative welding technology available. ...
    by Published on 02-18-2016 10:49 AM

    Enter for Your Chance to Win a Trip to Moab
    Originally posted: Thursday, 18 February 2016

    BORKED
    Click here to enter for your chance to win: http://bit.ly/1k7Jblx

    You’re not truly “Livin’ the Jeep Life” until you’ve experienced Moab. 4WD.com is giving one lucky winner and a guest the chance to cross this trip off their bucket list. They will join us on a weekend long adventure during the 50th Anniversary of Easter Jeep Safari.

    This 4WD.com Adventure Giveaway in Moab, Utah will include; Roundtrip airfare for (2), from anywhere in the continental United States and two night stay at the Gonzo Inn in downtown Moab, Friday March 25 through Sunday March 27.

    Friday, the winner and their guest will have VIP access to the vendor show and dinner at the annual Boy Scout BBQ. On Saturday, join Rock Krawler, Synergy Manufacturing, MCE Fenders, Crown Automotive, and the 4WD team for a day of wheeling on one of Moab’s best trails, Steel Bender. After a full day on the trail, the winner and their guest will head back to town for a Big Saturday dinner with 4WD and the giveaway sponsors.

    To hold you over until the winner is announced, each month, from November to February, we will be giving away a Moab-ready Jeep product provided by one of our four giveaway sponsors.

    Subscribe to the 4Wheel Drive Hardware YouTube Channel here: http://bit.ly/1KkCjw3

    ...
    by Published on 08-06-2015 10:00 AM

    Yeti Coolers: Ice Chests, Drinkware and Gear
    Originally posted: Wednesday, 6 August 2015

    BORKED
    Click here to check out Yeti Coolers on 4WD.com: http://bit.ly/1MKmsUB

    YETI Coolers are built to be indestructible and keep ice for days. Built for going toe-to-toe with hungry grizzlies. Built for the prepared. Built for better Monday morning water cooler talk. Built for the long haul. Built for the wild. ABOUT 4WD
    4Wheel Drive Hardware (4WD) is the leading mail order and Internet distributor of Jeep parts and accessories. As a division of Transamerican Auto Parts, 4WD is headquartered in Columbiana, Ohio.

    Visit 4WD online: http://www.4wd.com
    Team4WheelParts Blog: http://www.team4wheelparts.com/
    4WD Youtube Channel: http://jot.my/4wdyt
    Follow 4WD on Twitter: http://jot.my/4wdyt
    Like 4WD on Facebook: http://jot.my/4wdfb
    Call 4WD toll free: 800-913-8594

    ...
    by Published on 01-11-2012 09:59 AM

    PUREJEEP Jeep JK DANA 30/44 Axle Gusset Kit
    Orginally posted: Wednesday, 11 January 2012



    The best, most complete kit available to strengthen the factory JK front and rear axle housings. Our complete system includes full dimple-died Backbone Truss, track bar mount gusset, upper & lower C-Spine gussets and lower control arm skids (front and rear). Proudly made in the USA, our 3/16" Backbone and 3/4" C-Spine gusset set is a must have for JK's that hit the trail.

    ...
    by Published on 08-30-2011 10:07 AM

    JKS Front Trackbar + Sector Shaft Reinforcement Kit
    Originally posted: Tuesday, 30 August 2011


    Reinforcement kit from JKS Manufacturing stabilizes steering box shaft and strengthens chassis on 2007+ Wrangler JK's

    Alliance, NE – August 2011: Large diameter tires and hydraulic-assist steering can play havoc on Wrangler JK models if the front track bar and steering box are not reinforced. The factory track bar mount on the chassis is particularly vulnerable to extreme forces. Crank on the steering wheel too hard and you risk tearing the OE mount completely off of the frame.

    Unfortunately, the output shaft on the steering box is even more troublesome. The internal support bearings are poorly positioned and notorious for wearing out very quickly. Some indicators include a noticeable “clunk” noise and excessive play in the steering wheel. And since the OE steering box is not serviceable, the only option is to replace the entire assembly.

    ...
    by Published on 01-25-2011 04:09 PM

    WIRED HDH Switch Panels
    Originally posted: Tuesday, 25 January 2011


    WIRED HDH develops a better way to switch your stuff!

    Loveland, CO., WIRED HDH has developed a better way to switch your accessories. The new “Flat Switch Panel” (FSP) system needs virtually no depth to mount, has been designed to withstand the toughest conditions, and is completely user configurable. The system uses a thin keypad, a compact controller, and a quick connect harness to solve the common problems of bulky panels, limited space, and adaptability.


    ...
    by Published on 01-03-2011 10:47 AM

    Truck-Lite® 12v 7" LED Headlamps
    Originally posted: Monday, 03 January 2011


    Truck-Lite® Logo

    As you may or may not know, Truck-Lite® released the 7" round LED 12v headlamp in March of 2009. Ever since then, most Jeepers have wanted to get their hands on a set. These lights are the latest and greatest in lighting technology. I strongly feel that if it weren't for the current cost, everyone that could install them in their Jeep or Off-Road vehicle would do so.

    Truck-Lite® LED's

    ...
    by Published on 12-24-2010 05:06 PM

    Longevity ForceCut 50i Plasma Cutter
    Originally posted: Friday, 24 December 2010


    When working in the shop, the one thing I always hated doing was cutting steel. My choices were either the angle grinder (and the scars on my hands to go with it) or the sawzall, both got the job done, but neither resulted in the quality and speed that I would like. So as I began a new project, which involved cutting up a late 40's trailer (rust and all) and also building a complete custom frame, I knew it was time to look into something better. The something better I found was the Longevity ForceCut 50i Plasma Cutter. I know right now your thinking you can't afford a plasma cutter, but Longevity has plasma cutters to match most any budget, from right around $500 for a hobby machine all the way up to Industrial grade machines. The best part about Longevity Plasma cutters is they all come with a 5 year warranty!

    > Longevity Front View ...

    by Published on 10-05-2010 03:14 PM

    Modern Classic Enterprises TJ Wrangler Plastic "Flatty Fenders"
    Originally posted: Tuesday, 05 October 2010


    Flatty Fenders were created to give a Jeeper the option to improve upon the factory Jeep front fenders’ shortcomings: low clearance, thin sheet metal construction, and expensive to fix after a little (but easy to do ) “woops!”.

    The first industry response to these issues were rigid tube fenders. However, while tube fenders definitely solve the problems of low clearance and mangled fenders, we feel they do still have some shortcomings. These shortcomings are the high cost, weight, and their inherent nature of transferring impact loads to the Jeep body behind them: the tub and the grille. Over time, many small or just one large impact on the tube fender can take its toll on the rest of the Jeep body.



    ...
    by Published on 10-05-2010 11:01 AM

    Heavy Duty Replacement Transmission Mount Cross Member
    Originally posted: Tuesday, 05 October 2010


    Full-Traction Suspension JK Wrangler Heavy Duty Replacement Transmission Mount Cross Member

    Full-Traction Suspension introduces a new Heavy Duty replacement Transmission Mount Cross Member for the 2007-2010 Jeep JK Wrangler/Rubicon. This new bolt-in unit is designed for serious rock crawling abuse. HD crossmember utilizes factory mounting locations. No drilling required. Quality laser cut 3/16" steel construction with added skid plate to protect the exposed cross over exhaust system. This is the solution for the jeeper with a damaged factory cross member. Works with any short arm kit and most long arm kits on the market.

    ...

    Page 1 of 10 1 2 3 4 5 ... LastLast
  • Instagram

Jeep Parts | Jeep Accessories | Trektop NX | Jeep Seat Covers | Jeep Wrangler | Jeep Wrangler Parts | Jeep Wrangler Accessories | Bestop | Jeep Tires | Jeep Stuff | Jeep Wrangler Tires | Jeep Wheels