SOA question

[herm]

Has anybody done a spring over and 2" body lift combo ? If so how big of tires?
thanks

[ManglerYJ]

You could easily fit 36's or maybe 38's with a little rubbing depending on what axles you use (Dana60's have larger diameter tubes, so they give a little more lift also) and if you use any add-a-leafs.

I used S-10 leafs as add-a-leafs on mine. I recommend some sort of AAL on any potential SOA customers.

------------------
90 YJ with 305 TPI Firebird motor/SM465/ Dana20, SOA on Scout Dana44's

[Charly]

I'll be doing an SOA with my 2.5" springs (with extra leaves) and keeping the 1" body lift I have (and the TJ flares).

The axles will have larger tubes than stock also (Wag 44 front-3" tubes and 8.8 rear-3.25" tubes).

I will be running 36" SXs ( when I can get the cashola together) but I suspect I can run 38s and still flex well.

Charly

------------------
GOT AIR?
95 YJ, 33" hand siped TSLs
Charly's Pics (http://www.zing.com/album/pictures.html?id=4292780187&show_all=1&start=1)

[Jeeper]

I have a 2.5" Alcan spring SOA and no body lift on D60 and D44 and fit 38's fine, but I'm also flat fendered and have trimmed the rear well out.

Jeeper

------------------
99WJ: loaded
90YJ:SB 400, D60/D44, 4.88's, full Detroits, TH350, Atlas II 4.3:1, 38.5x14.50 SX's, 2.5" Alcan Spring SOA, Revolver shackles and Much Much More!
1950 CJ3-A small project
1975 J-10 Parts vehicle

"The harder you play, the more you pay!