lewismd71
07-10-2008, 11:47 AM
All,
First off, if this is in the wrong section please let me know and/or move it as required.
Second, I am looking to get opinions on what the following vehicle would be worth. It is in my fleet of cars and I have no idea what it is worth. It is not running due to the partially installed painless wiring harness. Presently the vehicle is NOT for sale.
1992 Jeep Wrangler
Full Soft top
Bikini top
1997 Vortec V6 w/ Howell engine conversion wiring harness
4L60E Transmission
Dana 300 (High Angle Driveline e-brake on output shaft)
Dana 60 front axle (4.56 gears) - Warn premium hubs with 35 spline stub shafts
14 bolt rear axle (4.56 gears and disc brake conversion)
Double beadlock military rims (from HMMVEE)
Military bias ply tires (from HMMVEE)
Art-Carr gate shifter for transmission (not installed)
High-Angle Driveline - 1 ton driveshaft w/ 1350 CV
Full waterproof painless wiring harness (partially installed)
New steering box from West Texas Off-Road (drilled and tapped with fittings for hydraulic assist - presently fittings are capped)
7075 Aluminum drag link
7075 Aluminum tie rod
Parts Mike hi-steer arm (passenger side only)
Items that could be included to get the value higher.
Set of 40" Goodyear MT/R's
Set of H2 rims
Extra set of 35 spline Dana 60 shafts (inners and outers)
TorqueFlite 727
All opinions are welcomed.
First off, if this is in the wrong section please let me know and/or move it as required.
Second, I am looking to get opinions on what the following vehicle would be worth. It is in my fleet of cars and I have no idea what it is worth. It is not running due to the partially installed painless wiring harness. Presently the vehicle is NOT for sale.
1992 Jeep Wrangler
Full Soft top
Bikini top
1997 Vortec V6 w/ Howell engine conversion wiring harness
4L60E Transmission
Dana 300 (High Angle Driveline e-brake on output shaft)
Dana 60 front axle (4.56 gears) - Warn premium hubs with 35 spline stub shafts
14 bolt rear axle (4.56 gears and disc brake conversion)
Double beadlock military rims (from HMMVEE)
Military bias ply tires (from HMMVEE)
Art-Carr gate shifter for transmission (not installed)
High-Angle Driveline - 1 ton driveshaft w/ 1350 CV
Full waterproof painless wiring harness (partially installed)
New steering box from West Texas Off-Road (drilled and tapped with fittings for hydraulic assist - presently fittings are capped)
7075 Aluminum drag link
7075 Aluminum tie rod
Parts Mike hi-steer arm (passenger side only)
Items that could be included to get the value higher.
Set of 40" Goodyear MT/R's
Set of H2 rims
Extra set of 35 spline Dana 60 shafts (inners and outers)
TorqueFlite 727
All opinions are welcomed.