GZD95Rx7
06-29-2007, 11:37 PM
Okay, I'm putting the dash in my new tub, and it's been so long since I took it out of the old one(I had to take a month off working on it after surgery), I can't remember a few things. I was curious to see if anyone could help me out with these:
The green vaccuum line goes on what one of the three nipples on the back of the heater/blower control(see below):
http://i70.photobucket.com/albums/i100/7speed/Jeep1.jpg
The black vaccum line goes in what hole of the piece in the picture below(if none, where does it go)? The black line is coming from the engine compartment through the firewall(see below):
http://i70.photobucket.com/albums/i100/7speed/Jeep4.jpg
Do any vaccum lines go on this actuator on the top of the blower box(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep3.jpg
Where do these plug in(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep5.jpg
Where do these plug in(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep6.jpg
Where does this plug in(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep2.jpg
Is there anything I'm missing? I've got all the other wires in the harness plugged into all the correct locations (that I know of):
Thanks in advance.
The green vaccuum line goes on what one of the three nipples on the back of the heater/blower control(see below):
http://i70.photobucket.com/albums/i100/7speed/Jeep1.jpg
The black vaccum line goes in what hole of the piece in the picture below(if none, where does it go)? The black line is coming from the engine compartment through the firewall(see below):
http://i70.photobucket.com/albums/i100/7speed/Jeep4.jpg
Do any vaccum lines go on this actuator on the top of the blower box(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep3.jpg
Where do these plug in(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep5.jpg
Where do these plug in(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep6.jpg
Where does this plug in(see below)?:
http://i70.photobucket.com/albums/i100/7speed/Jeep2.jpg
Is there anything I'm missing? I've got all the other wires in the harness plugged into all the correct locations (that I know of):
Thanks in advance.