Body Lift after Suspension

[galaxyace]

Not sure if this is a good Idea, but i have a 3" suspension lift on my 92 YJ. I want to put some 35's on it but you need at least 6" of lift to put them on. can i get a 3" body lift. that would give me a total of 6". or what would be the best way so i can put some 35's on it?

[4.Oh]

Adding a 3" body lift is not always a good way to go as it puts a lot of stress on the tub mounting points. I run 35's with a 3.5 BDS, 5/8" boomerangs, 1" body lift, tube fenders and TJ flares in back. just built the tube fenders and now have no rub points at all.

[galaxyace]

What would be the most cost efficient way to put 35's on a YJ

[Green93Sahara]

What would be the most cost efficient way to put 35's on a YJ



Well that would be the Body Lift...but like 4.0h said not the best/prefered way by most. Actaully the most cost efficient would be to put them on and just cut away at the jeep till you dont rub anymore!! :blingx2:

[cliffslocal]

If you want you tub mounts to look like this yeah go fer it :banghead:

The moron that put this on my jeep (i just bought it for 1800) was not bright.

What its costing me to have a shop weld in plate 600-800 i could of bought a flipping 4.5 RE extreme lift for mine.

Do what the other guy said, tj flares 1in bl and boomerangs.

or breakout the sawzall :beerchug:

[ToughYJ]

with a 3"spension lift, slap on a 2" Body lift and some TJ flares and you should clear 35s just fine.