TJ x15 into a YJ questions..

[emyselfandi]

So i have the tranny, bell, new clutch kit, slave/master sealed unit, shifter, pilot bushing, throwout bearing, and fluid. Any tips for the swap?? i know i have to drill new holes for the m/c b/c it is longer than the YJ one. And I need female torks for the top two bolts on the tranny.. Does the 231 get RTV when you bolt it up to the back of the tranny? Anything else i need to know before it dive in?? I figure it is a pretty straight forward swap/direct bolt up. Some advice would be awesome. Thanks Tim

its a 98 going into a 93.

[HEEPJEEP]

It is a AX15 (not X15). I swapped a 94 into a 89 and it went smoothly, hope it goes well for you. I have never used RTV between the tranny and t-case but it can't hurt anything.

[emyselfandi]

you have a pic of where you mounted to m/c on the fire wall?? just curious to know where to mount it. thanks Tim

sorry about the ax15 i'm just lazy.

[emyselfandi]

anyone know if i need to get a transfercase relocation bracket for this job?? i recall seeing some posts on it?? thanks