PDA

View Full Version : My recent mods(I hope)

PAjeepinNH
07-18-2003, 07:47 PM
Here are some picts(I hope the lin works) of the boomerangs and shock hoops I recently added to the Jeep. Just opened an album w/ image station and I am trying to see how badly I suck at the internet:sousy: Enjoy and let me know what you think:yup:
Shock hoop (http://www.imagestation.com/picture/sraid70/pe22d5c6aeccde5e000f5638949a78088/fba361b9.jpg)
Rear boomer (http://www.imagestation.com/picture/sraid70/p92f9589aefe0e6a9692ee74809765606/fba361c1.jpg)
Front Boomer (http://www.imagestation.com/picture/sraid70/pc8b6a333d7b39d22414323f4b5c492f8/fba3630a.jpg)
Another angle of the fronts (http://www.imagestation.com/picture/sraid70/pdfb152b99c92b68743ab0ad9e102dbcf/fba36308.jpg)
And my favorite bumpa' sticka'......
I'm a Big Wheeler' (http://www.imagestation.com/picture/sraid70/p9f3a05b8b79c328c0e9bfcdff2540446/fba3630c.jpg)
Now........Did THAT fix the problem? ('prolly not:naw: )
PAjeepinNH
07-18-2003, 07:49 PM
OK, The links work NOW, but the image is so freaking small you can barely see anything. How do I make them larger? HEEEEEELLLLLLLLP!
PAjeepinNH
07-19-2003, 06:04 PM
There ya go. It works now. no thanks to all of you that helped me figure that one out:naw:
"I can SEE. I CAN SEEEE!"
Hackle
07-19-2003, 06:26 PM
Did you use rust colored paint or did they rust as fast as you put them on??
:brows:
Looks good and the links work now.
fabian
07-19-2003, 06:27 PM
Looks good :).
Mr.Jowee
07-19-2003, 06:27 PM
why are the front ones on diffrent than the back ones? it looks like one set is upside down.
PAjeepinNH
07-19-2003, 06:33 PM
Yeah, I still have to paint them. Couldn't do the hoops until they were on because of the welding required(woulda burnt the paint off) and the shackles I can paint the next time I am on a flat drive way and can put the Heep up on stands.(in a couple of weeks when i am in PA again). I really like having a sloped driveway for changing fluids:yup: but other than that it is a total pain in the azz:naw:
PAjeepinNH
07-19-2003, 06:42 PM
-=- originally posted by Mr.Jowee -=-
why are the front ones on diffrent than the back ones? it looks like one set is upside down.

The fronts go on w/ the short part at the top to prevent the shackle from inverting itself and locking up the spring. The rears go short end down to clear the frame cross member on full compression. Sorry about that, there were two of the same pict(rear shackle). I have changed it and it NOW correctly shows the fronts from 2 diff. >'s. Any other ?s class?