What size bolts for 8.8 flange?

[DanH]

Bought the Spicer flange for the 8.8. Anyone know what size bolts you use?

Throw some lockwashers on there? How about a nut on the other side of the flange?

Thanks!

Dan

[jeepik]

go to the Ford dealer the yhave them by the hundreds, and they are not that xpensive

they come with that locktite stuff already on the bolts so you wont need washers or nuts or nothing

[code5337]

Here Ya go:
Bolt size (U-joint flange to yoke) is: 12 x 1.75 x 30 mm.
Any auto parts store should have them.

[Joe Dillard]

-=- originally posted by code5337 -=-
Here Ya go:
Bolt size (U-joint flange to yoke) is: 12 x 1.75 x 30 mm.
Any auto parts store should have them.

I'll stock that away in my memory banks Chris. Thanks! :)

[Dev Dev 23]

-=- originally posted by code5337 -=-
Here Ya go:
Bolt size (U-joint flange to yoke) is: 12 x 1.75 x 30 mm.
Any auto parts store should have them.

Make sure the threads go all the way to the head of the bolt. I bought some metric bolts because the dealership was closed, turns out the unthreaded part of the bolt won't fit through the flange because it is a bigger diameter where it's not threaded. I ended up going to the dealership anyway.
Devin

[DanH]

I paid the dealer for some.

Thanks!