Driverside sits lower than passangerside

[sonick]

I just finished SOA using OME Springs about 1 month ago.
The same springs were on SUA application for about 3 years.
I just noticed that the driver side sits lower than the passanger side for about 1 inch. But I didn't noticed that when it was on SUA.
Are the driverside springs sagging? Can I switch the springs to cure
the problem? What is your suggestion?

[srb 95yj]

My springs were sagging about 1.5 to 2 inches on my YJ and I did just like what you were talking about. I rotated them so that the sagging springs were on the rear. You may want them on the front though, depending on your rig. My Jeep sat a little higher in the ass end anyway.

I ran that for a couple months then yanked em. They started sagging way too bad before long. :sousy:

[sonick]

I mean the right side (driver side) sits lower and left side (passanger side) sits higher. Not front and back. I have a right-hand-drive Jeep here.

[Michael Walsh]

Join weightwatchers.

[srb 95yj]

-=- originally posted by sonick -=-
I mean the right side (driver side) sits lower and left side (passanger side) sits higher. Not front and back. I have a right-hand-drive Jeep here.

Oh, so you only have one spring that is sagging?

[sonick]

right side, front and back. :banghead: